Menu
Log in


Introducing Stick Welding

22 Jul 2020 10:15 AM | Anonymous

Continuing the Roswell Firelabs Makerspace’s series on welding, here is an introduction to the arc welding method of stick welding.

Stick welding is a method that relies on a welding rod or welding electrode (the ‘stick’) that is charged with an electrical current. This is typically AC or AC/DC. When the welding rod is held close to the piece of metal being welded, which is also charged, the current leaps between them and completes the circuit. The process heats the electrode material to the point of melting and allows the weld to be made.


Most stick welding projects are done with iron or steel, which react most favorably to the method. This makes it ideal for outdoor projects when coupled with its forgiveness of rusty or otherwise contaminated metals. While other methods, such as last week’s focus on TIG welding, are quite sensitive to contamination, stick welding has a lot of wiggle room. The most essential part of ensuring success for a stick welding project is to pick the right stick. 

Welding rods come in a variety of sizes and metals. Each is covered in something called a flux coating. This coating ensures that the metal doesn’t burn up during the welding process. Athlon Outdoors but it well: 

Electrodes come in dozens of sizes and types, each for a specific job at hand. The 6010, 6011 and 6013 are common electrodes for welding steel. The first two numbers (60) identify tensile strength in pounds per square inch times 1,000, or 60,000 psi in these examples. The third number (1) indicates the position in which the rod can be used. A “1” indicates any position—flat, vertical, horizontal or overhead—and “2” indicates only the flat, horizontal position. The last two numbers together (“13” in 6013) indicate the type of flux, which will affect the amount of slag or corrosion that builds up around the weld, as well as the liquidity of the bead or puddle.

Once you have the proper welding rod picked out, you’re ready to go! Just don’t forget your safety gear!



Comments

  • 28 Aug 2021 2:15 PM | Stromectol
    Can I Take Metamucil With Amoxicillin
    Link  •  Reply
  • 15 Sep 2021 9:22 PM | does priligy work
    Tadalafil 5mg Buy Online India
    Link  •  Reply
  • 4 Oct 2021 11:52 PM | order prednisone from canada
    1650 Canadian Pharmacy Online No Script
    Link  •  Reply
  • 6 Oct 2021 12:15 AM | neurontine for seizures
    Kamagra Jelly 100mg
    Link  •  Reply
  • 7 Nov 2021 6:09 PM | Lasix
    Priligy Precio 2011
    Link  •  Reply
  • 10 Nov 2021 5:30 PM | priligy 30mg tablets
    Is There A Generic Equivqlent For Zetia
    Link  •  
    Author
    * Comment
     
  • 12 Nov 2021 6:38 PM | buy prednisone without no prescription
    Cafergot Discontinued
    Link  •  Reply
  • 7 Dec 2021 4:03 AM | hydroxychloroquine for sale amazon
    Mexico Drugs Online
    Link  •  Reply
  • 9 Dec 2021 4:45 AM | gabapentin 800
    Propecia Tinnitus
    Link  •  Reply
  • 19 Dec 2021 7:21 PM | drug interactions
    Mebendazole Over The Counter Canada
    Link  •  Reply

Blog posts


Roswell FireLabs
1601 Holcomb Bridge Rd

Roswell, GA 30076

Roswell FireLabs is managed by Atlanta Maker Alliance, Inc., a local 501(c)3 non-profit organization.

By participating in any activities at the Roswell Firelabs, you acknowledge the following terms:

  1. I am aware and understand that some activities conducted at Roswell Firelabs are inherently dangerous and involve risk of injury, death, or property damage. 
  2. I acknowledge that I am voluntarily participating in the activities and/or facilities operated by the organization, and agree to accept all risks. 
  3. I acknowledge all training, safety, and general policies and procedures ratified by the organization, and pledge to abide by them.
  4. I acknowledge and agree to hold harmless Roswell Firelabs / Atlanta Maker Alliance, its members, officers, directors, successors, and delegates from all claims on account of personal injury, death, or property damage attributed to my participation in activities and/or facilities operated by Roswell Firelabs / Atlanta Maker Alliance.
  5. I agree to not bring any claims against the organization, and hereby release and discharge the organization from liability under any such claims.
  6. Additionally, I agree to hold the organization harmless against any and all losses, damages, liabilities, deficiencies, claims, actions, judgments, settlements, interest, awards, penalties, fines, costs, or expenses of whatever kind arising from any claim of a third party related to activities and/or facilities operated by Roswell Firelabs / Atlanta Maker Alliance.
  7. I acknowledge that Roswell Firelabs utilizes video recording devices for the security of the property and the welfare of the organization.


Powered by Wild Apricot Membership Software