Menu
Log in
Forgot password


Log in

DELTA Precision 8-Inch 1-1/2-Horsepower Jointer (37-350A DJ-20)

Overview

High-performance and large capacity make this jointer a truly industrial machine. This eight-inch jointer has a 1-1/2 horsepower induction motor and a cast iron table. The cast iron fence tilts 45 degrees in and out with positive stops at both extremes and at 90 degrees for easy set up. The infeed table adjusts easily with the lowering and raising lever. A parallelogram support system assures superior chipbreaking for cleaner cuts. When the height of the infeed table is adjusted, the front edge moves in an arc around the cutterhead to maintain a minimal clearance that reduces chipping of the workpiece. A built-in rabbeting ledge allows cuts up to 5/8 of an inch deep. Built for long, trouble-free tool life with and induction motor and sealed, lubricated-for-life ball bearings.


Hazards & Safety

 Crush Hazard (feet).  Any number of things in the woodshop can seriously injure your feet if you drop something on them. Wear eye protection (ANSI Z87 preferred) at all times in the woodshop.
 

Moving Parts. Many of our power tools have rotating parts, gears, belts, blades, pulleys, gantries, etc.  You should always make sure you have secured loose hair/clothing/accessories at all times in the woodshop.  Additionally, do not wear any kind of gloves when using mechanical equipment, due to snagging risks.

  Wear closed-toe shoes at all times in the woodshop.
 Sharp Implements.  There are many things in the woodshop that can puncture and cut skin.  Many of our tools make louder than normal noises, so wear hearing protection as needed.
 Fume/Ventilation Hazard.  Fine sawdust/particulate, fumes from paint, stains, and other chemicals, and fumes from other areas (such as the metalworking area) may be present.  Always use the available dust collection and ventilation systems.  Wear breathing protection where fumes or fine particulate dust is present.


Roswell FireLabs
1601 Holcomb Bridge Rd
Roswell, GA 30076

Roswell FireLabs is managed by Atlanta Maker Alliance, Inc., a local 501(c)3 non-profit organization.

By participating in any activities at the Roswell Firelabs, you acknowledge the following terms:

  1. I am aware and understand that some activities conducted at Roswell Firelabs are inherently dangerous and involve risk of injury, death, or property damage. 
  2. I acknowledge that I am voluntarily participating in the activities and/or facilities operated by the organization, and agree to accept all risks. 
  3. I acknowledge all training, safety, and general policies and procedures ratified by the organization, and pledge to abide by them.
  4. I acknowledge and agree to hold harmless Roswell Firelabs / Atlanta Maker Alliance, its members, officers, directors, successors, and delegates from all claims on account of personal injury, death, or property damage attributed to my participation in activities and/or facilities operated by Roswell Firelabs / Atlanta Maker Alliance.
  5. I agree to not bring any claims against the organization, and hereby release and discharge the organization from liability under any such claims.
  6. Additionally, I agree to hold the organization harmless against any and all losses, damages, liabilities, deficiencies, claims, actions, judgments, settlements, interest, awards, penalties, fines, costs, or expenses of whatever kind arising from any claim of a third party related to activities and/or facilities operated by Roswell Firelabs / Atlanta Maker Alliance.
  7. I acknowledge that Roswell Firelabs utilizes video recording devices for the security of the property and the welfare of the organization.


Powered by Wild Apricot Membership Software