The Ryobi 10" Table Saw System is a high precision, configurable table saw. It provides smooth and accurate rip, crosscut, miter and bevel cuts in soft or hard woods, up to 3 ½ inches thick.

Training Required: Woodworking 101.


  • "T-square" rip fence.  Locks both front and rear for precise operation.
  • Sliding miter table with high-accuracy miter scale. Cuts +/- 45° miters.
  • Solid extruded aluminum miter and extension tables are detachable and moveable to either side of the blade.
  • Standard rip capacity of 24 inches, crosscut capacity of 16 inches.
  • Adjustable fence and table rails allow rip, miter and crosscuts of up to 30 inches.
  • Rip fence and miter fence T-slots provide secure mounting for jigs, stops and feather boards.
  • Built-in dust collection shroud.
  • Safety power switch with fast emergency cutoff.


Blade Diameter

10 in. (254 mm)

Blade Arbor

5/8 in. (16 mm)

Cutting Depth at 0°

3-9/16 in. (90.5 mm)

Cutting Depth at 45°

2-1/2 in. (63.5 mm)


120 Volts, 60 Hz, 15 Amps

Blade Speed

4,800 RPM

Net Weight with Stand

107 Lbs. (48.6 kg.)


Hazards & Safety

 Crush Hazard (feet).  Any number of things in the woodshop can seriously injure your feet if you drop something on them. Wear eye protection (ANSI Z87 preferred) at all times in the woodshop.

Moving Parts. Many of our power tools have rotating parts, gears, belts, blades, pulleys, gantries, etc.  You should always make sure you have secured loose hair/clothing/accessories at all times in the woodshop.  Additionally, do not wear any kind of gloves when using mechanical equipment, due to snagging risks.

  Wear closed-toe shoes at all times in the woodshop.
 Sharp Implements.  There are many things in the woodshop that can puncture and cut skin.  Many of our tools make louder than normal noises, so wear hearing protection as needed.
 Fume/Ventilation Hazard.  Fine sawdust/particulate, fumes from paint, stains, and other chemicals, and fumes from other areas (such as the metalworking area) may be present.  Always use the available dust collection and ventilation systems.  Wear breathing protection where fumes or fine particulate dust is present.

Roswell FireLabs
1601 Holcomb Bridge Rd

Roswell, GA 30076

Roswell FireLabs is managed by Atlanta Maker Alliance, Inc., a local 501(c)3 non-profit organization.

Powered by Wild Apricot Membership Software