The SawStop® 110V, 1.75HP 10" Professional Contractor Saw is engineered to fit the unique demands of the avid hobbyist in a home setting.
SawStop’s innovative safety system detects hand or finger contact with the saw blade within milliseconds, instantly stopping and retracting the blade, preventing serious injury.

Training Required:  Woodworking 101


·      "T-glide" rip fence

·      Standard rip capacity of 36 inches, crosscut capacity of 10 1/4 inches

·      Built-in dust collection shroud

·      Safety power switch with fast emergency cutoff



1.75 hp, 110 Volts, 14 Amps

Blade Diameter

10 in. (254 mm)

Blade Arbor

5/8 in. (16 mm)

Max. rip, right of blade

36 in.

Cutting Depth at 0°

3 1/8 in. (79.5 mm)

Cutting Depth at 45°

2-1/4 in. (57 mm)

Net Weight w/o Stand

365 lbs


   Manufacturer's Product Page:
SawStop Contractor Saw

   Product Manual:
SawStop Manual.pdf

   Other Help Articles:
SawStop Contractor Saw Product Tour
Helpful SawStop Links

Hazards & Safety

 Crush Hazard (feet).  Any number of things in the woodshop can seriously injure your feet if you drop something on them. Wear eye protection (ANSI Z87 preferred) at all times in the woodshop.

Moving Parts. Many of our power tools have rotating parts, gears, belts, blades, pulleys, gantries, etc.  You should always make sure you have secured loose hair/clothing/accessories at all times in the woodshop.  Additionally, do not wear any kind of gloves when using mechanical equipment, due to snagging risks.

  Wear closed-toe shoes at all times in the woodshop.
 Sharp Implements.  There are many things in the woodshop that can puncture and cut skin.  Many of our tools make louder than normal noises, so wear hearing protection as needed.
 Fume/Ventilation Hazard.  Fine sawdust/particulate, fumes from paint, stains, and other chemicals, and fumes from other areas (such as the metalworking area) may be present.  Always use the available dust collection and ventilation systems.  Wear breathing protection where fumes or fine particulate dust is present.

Roswell FireLabs
1601 Holcomb Bridge Rd

Roswell, GA 30076

Roswell FireLabs is managed by Atlanta Maker Alliance, Inc., a local 501(c)3 non-profit organization.

Powered by Wild Apricot Membership Software