The Graphtec FC7000-75 is a large-format vinyl cutter and plotter, with a maximum cutting area of 30 inches wide and 164 feet long.  It is ideal for cutting or tracing large banners, decals, patterns, etc.

Training Required:  Vinyl


Cutting Area
30in x 164 feet
Compatible Media Width
2.9in x 36.2in
Maximum Media Thickness
59.1 mil
Programmable Cutting Force
20g to 600g in 40 steps
Compatible Blade Types
0.9 mm 45°, or 1.5 mm 45° or 30° Graphtec SuperSteel, 1.5mm ceramic or 1.5mm sapphire tip blades

Compatible Pen Types
Water/oil-based fiber tip, water/oil-based ballpoint, Fine Point Sharpie (with optional pen adapter)
Compatible Media Types
Cast/calendared vinyl, window tint, paint protection, PET film, EC film, diamond grade and high Intensity reflective, laminate
film, vinyl banner, Amberlith™, Rubylith™, paper, decals, labels, garment vinyl, flex, flock, twill, sandblast mask

Power Requirements
100-240V AC, 50/60 Hz; auto switching, 120 VA maximum Power Consumption


    Hazards & Safety


    Hot Surfaces.  Do not touch 3D Printer Extruders, Beds, Heat Press interior, or Flash Dryer interior while in operation or immediately after use.  Wait for all heated surfaces to cool down.

     Wear gloves when working with SLA 3D Printer Resin and other chemicals.  Use heat-resistant gloves when you need to touch heated surfaces (such as cleaning printer extruders).

    Moving Parts. Do not touch equipment while in operation.  Secure loose hair/clothing/accessories.


    Hazardous Lasers/Invisible Light in use. Do not open the SLA Resin Printer enclosure while in operation.


    Chemical Hazard when working with SLA 3D Printer Resin and other chemicals.

     Sharp Implements.  Don't touch the cutting blades on the vinyl cutters.  

    Roswell FireLabs
    1601 Holcomb Bridge Rd

    Roswell, GA 30076

    Roswell FireLabs is managed by Atlanta Maker Alliance, Inc., a local 501(c)3 non-profit organization.

    By participating in any activities at the Roswell Firelabs, you acknowledge the following terms:

    1. I am aware and understand that some activities conducted at Roswell Firelabs are inherently dangerous and involve risk of injury, death, or property damage. 
    2. I acknowledge that I am voluntarily participating in the activities and/or facilities operated by the organization, and agree to accept all risks. 
    3. I acknowledge all training, safety, and general policies and procedures ratified by the organization, and pledge to abide by them.
    4. I acknowledge and agree to hold harmless Roswell Firelabs / Atlanta Maker Alliance, its members, officers, directors, successors, and delegates from all claims on account of personal injury, death, or property damage attributed to my participation in activities and/or facilities operated by Roswell Firelabs / Atlanta Maker Alliance.
    5. I agree to not bring any claims against the organization, and hereby release and discharge the organization from liability under any such claims.
    6. Additionally, I agree to hold the organization harmless against any and all losses, damages, liabilities, deficiencies, claims, actions, judgments, settlements, interest, awards, penalties, fines, costs, or expenses of whatever kind arising from any claim of a third party related to activities and/or facilities operated by Roswell Firelabs / Atlanta Maker Alliance.
    7. I acknowledge that Roswell Firelabs utilizes video recording devices for the security of the property and the welfare of the organization.

    Powered by Wild Apricot Membership Software