Menu
Log in


Overviewimg

The Silhouette CAMEO 3 is a vinyl cutter that plugs into your PC or Mac with a simple USB cable and uses a small blade to cut over 100 materials, including paper, cardstock, vinyl, and fabric up to 12 inches wide and 10 feet long.  When you replace the blade with a pen, the CAMEO can also sketch and ink stipple.

Training Required:  Vinyl

Features

  • Maximum cutting area: 12" x 24" (30.5cm x 71cm) with a cutting mat, 12" x 10ft. (30.5cm x 3m) with a lined media
  • 2 mm clearance
  • Full-color LCD touch screen
  • Bluetooth and PixScan compatible
  • Compatible with vinyl, heat transfer material, cardstock, photo paper, copy paper, rhinestone template material, fabric and more
  • USB 2.0 interface


    Resources




    Hazards & Safety

     

    Hot Surfaces.  Do not touch 3D Printer Extruders, Beds, Heat Press interior, or Flash Dryer interior while in operation or immediately after use.  Wait for all heated surfaces to cool down.

     Wear gloves when working with SLA 3D Printer Resin and other chemicals.  Use heat-resistant gloves when you need to touch heated surfaces (such as cleaning printer extruders).
     

    Moving Parts. Do not touch equipment while in operation.  Secure loose hair/clothing/accessories.

      
     

    Hazardous Lasers/Invisible Light in use. Do not open the SLA Resin Printer enclosure while in operation.

      
     

    Chemical Hazard when working with SLA 3D Printer Resin and other chemicals.

      
     Sharp Implements.  Don't touch the cutting blades on the vinyl cutters.  


    Roswell FireLabs
    1601 Holcomb Bridge Rd

    Roswell, GA 30076

    Roswell FireLabs is managed by Atlanta Maker Alliance, Inc., a local 501(c)3 non-profit organization.

    By participating in any activities at the Roswell Firelabs, you acknowledge and agree to the following terms:

      • I am aware and understand that some activities conducted at Roswell Firelabs are inherently dangerous and involve risk of injury, death, or property damage.

      • I acknowledge that I am voluntarily participating in the activities and/or facilities operated by the organization, and agree to accept all risks.

      • I acknowledge all training, safety, and general policies and procedures ratified by the organization, and pledge to abide by them.

      • I acknowledge and agree to hold harmless Roswell Firelabs / Atlanta Maker Alliance, its members, officers, directors, successors, and delegates from all claims on account of personal injury, death, or property damage attributed to my participation in activities and/or facilities operated by Roswell Firelabs / Atlanta Maker Alliance.

      • I agree to not bring any claims against the organization or the City of Roswell, and hereby release and discharge the organization and the City of Roswell from liability under any such claims.

      • Additionally, I agree to hold the organization and the City of Roswell harmless against any and all losses, damages, liabilities, deficiencies, claims, actions, judgments, settlements, interest, awards, penalties, fines, costs, or expenses of whatever kind arising from any claim of a third party related to activities and/or facilities operated by Roswell Firelabs / Atlanta Maker Alliance.

      • I acknowledge that consent to this LIABILITY DISCLAIMER is implied upon entering the premises, either on my own behalf or through my legal guardian.

      • I certify that I am either a legal adult (18 years old), or will be accompanied by a legal chaperone/guardian capable of consenting to this LIABILITY DISCLAIMER on my behalf.  If I falsify my age (either on my own or through someone on my behalf), I acknowledge that this is not the fault, liability, or responsibility of Roswell Firelabs/Atlanta Maker Alliance, Inc., and the terms of this LIABILITY DISCLAIMER still apply.



        Powered by Wild Apricot Membership Software