See the source image

The UP Mini Desktop 3D Printer is a simple and affordable Fused Deposition Modeling printer, capable of printing objects with a volume of up to 120 x 120 x 120 mm (W x D x H).

Training Required:  3D Printing 101


Build volume 120 x 120 x 120 mm (W x D x H)
Support Material Smart Supports. Intelligent snap off support material, printed in the same material, printed at a lower density and built automatically by the included 3D print software
Selectable layer resolution 0.2mm (200 micron), 0.25mm, 0.3mm, 0.35mm
Raftless printing No
Dimension 245mm width,260mm depth, 350mm height
Platform Sprung platform – platform calibration done via software.
Weight Printer weight 5kg, Shipping weight 11.5kg
Power input 110-220VAC, 50-60Hz, 220W
Connectivity USB - print job is cached to printer when started; you can disconnect USB or shut down the PC after starting the print.
Consumables 1.75mm ABS Plastic Filament, 1.75mm PLA Plastic Filament


    Hazards & Safety


    Hot Surfaces.  Do not touch 3D Printer Extruders, Beds, Heat Press interior, or Flash Dryer interior while in operation or immediately after use.  Wait for all heated surfaces to cool down.

     Wear gloves when working with SLA 3D Printer Resin and other chemicals.  Use heat-resistant gloves when you need to touch heated surfaces (such as cleaning printer extruders).

    Moving Parts. Do not touch equipment while in operation.  Secure loose hair/clothing/accessories.


    Hazardous Lasers/Invisible Light in use. Do not open the SLA Resin Printer enclosure while in operation.


    Chemical Hazard when working with SLA 3D Printer Resin and other chemicals.

     Sharp Implements.  Don't touch the cutting blades on the vinyl cutters.  

    Roswell FireLabs
    1601 Holcomb Bridge Rd

    Roswell, GA 30076

    Roswell FireLabs is managed by Atlanta Maker Alliance, Inc., a local 501(c)3 non-profit organization.

    Powered by Wild Apricot Membership Software